In some cases where the sensor may not be working properly or not set correctly, you may want to temporarily turn off all the zones or specific zones.
Bypassing Sensor for All Zones
- Log in to your HYDRAWISE account
- Click the
icon in the upper left. Skip this step on a PC.
- Click SENSORS.
- Click on the
icon under the active sensor.
- Scroll down to the CONTROLLER INPUT.
- Change the controller input to UNASSIGNED.
- Click OK.
The sensor is now turned off until you switch back the controller input setting.

Bypassing Specific Zones
- Log in to your HYDRAWISE account
- Click the
icon in the upper left. Skip this step on a PC.
- Click SENSORS.
- Click on the
icon under the active sensor.
- Scroll down and select NEXT.
- In the selected zones section, select the ZONES that you would like to continue watering if the sensor is activated. This will move them up to the available zones section.
- Click OK.
