Wi-Fi Irrigation Control

Follow

Wireless - Checking Server Status

Checking wifi signal is a simple process and can be done when in front of the controller.  In some cases, the router may broadcast two bandwidths 2.4 ghz and 5 ghz.  Hydrawise controllers could show connected on the HOME screen on 5 ghz, but is not a true connection for the application to successfully work. The bandwidth 2.4 ghz is the required bandwidth for this application, see more in wifi specs.

  1. Select "Status."
  2. Select "Controller Status."
  3. Check "Server Status."        

Server status below would indicate the controller has a accurate wifi signal.

Server Status
Syncing - "time" Versions older than 3.23
Ok - Updated "time" Ago Version 3.23 and above

   

Step 1
                              Home_Screen_status.png

 

Step 2
                              Connection_2.png

 

Step 3
                              Connection_3.png

  



Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request