Wi-Fi Irrigation Control
Print Support Article


Sensors - Clik Sensor Status

Please take note of the sensor states below once you've successfully set up your sensor through the Hydrawise application.

Normally Closed (Default Setup)


Green Dry, Not Active Watering Allowed
Red Wet, Active Watering Not Allowed


Normally Open (Bypass Setup) 

"Normally open" is used to bypass the sensor, so you can activate it manually when you want to suspend watering using the rain sensor. Otherwise, the default setup is to use "normally closed."

For more information on configuring sensors, check our guide here.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request